Contact Us Now

 

This post which follows involving What Would Cause My Electric Water Heater to Stop Working? is rather informative. Don't miss out on it.

Numerous modern residences utilize an electrical hot water heater for their heating system, because of its ease and also ease of use. However, just like any other electrical devices, issues might emerge with its use, all of a sudden. It can be really aggravating to awaken to a cold shower as opposed to a hot one or having your bathroom with water that isn't warm enough or even also hot. Whatever the situation might be, water heater troubles can be fairly aggravating. Fortunately, we've made a list of feasible remedies to your water heater problems. There are a variety of elements that could cause most of these issues, it could be a concern with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, guarantee you shut off the major power supply for safety and security. Whatever the issue is, getting it repaired need to not present way too much of a problem if you comply with these steps:

 

Check Your Power Supply:

As standard as this might appear, it is very required. Without adequate power, your water heater will not function. So the first thing to do when your water instantly retires is to confirm that it isn't a power problem. Examine if the fuse is blown out or the breaker stumbled. If the circuit breaker is the problem, merely turn it off and on once again. Replace any busted or worn-out fuse. Test the home appliance with power after these adjustments to see if it's now functioning.

 

Examine the Heating Element in the Water Heater:

If it's not a power issue, then attempt looking into your heating element if it is still working. Test each of your heating elements to ensure the trouble isn't with any one of them. If any of them is damaged, replace that component and after that examine whether the warm water is back on.

 

Inspect Your Thermostat:

If your hot water heater still isn't functioning or the water coming out isn't warm enough, you might require to inspect the temperature level settings on your top thermostat. Make sure the circuit breaker is switched off before doing anything. Open up the accessibility panel and press the red button for temperature reset above the thermostat. This need to help heat up the water. Transform the circuit breaker back on as well as inspect if the trouble has actually been solved.

 

Call A Specialist:

If after replacing all faulty parts and resetting your temperature, the hot water heater still isn't functioning, you might need to call a specialist plumber for a specialist viewpoint. The problem with your heating system could be that the hot and cold faucets have been switched or it might be undersized for the amount of warm water required in your home. Whatever the instance may be, an expert plumber would help address the issue.

 

Conclusion

Water heater troubles are not constantly significant. Most of them result from small issues like a blown fuse or damaged burner. Replacing the defective parts should work. Nonetheless, if you are still unable to solve the problem, give a call to your closest plumber to find to get it dealt with.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

Hopefully you enjoyed our section on How to Troubleshoot and Repair an Electric Water Heater. Thanks a lot for spending some time to browse our article post. Feel free to take a moment to share this post if you appreciated it. Thanks a bunch for your time. Kindly visit our website back soon.

Learn More